Tales of the Arabian Nights Pinball Machine Parts:

Bazaar Scoop   (comparison of redesign with original)

totan3.jpg (137000 bytes)

Protector kit

totanprot.JPG (42671 bytes)

Installation for protector kit: The L shaped piece sits on the front edge of the bazaar scoop entrance screwed in from underneath the playfield.   Yes you will have to take off the scoop to install.  The ring goes in the left pinball capture hole.  It is designed to sit down into the hole protecting the edges of the hole.  Take clear bathroom silicon and apply a bead under the lip of the ring and press into hole fitting it correctly.  Some of the silicon may squirt out around the edge.  This is normal.  Take a papertowel and wipe up the excess silicon.   The silicon does several things.  First it provides an additional cushion for impact.  Second it holds the ring in place during game play.  Should the ring ever break free just strip the old silicon and reinstall.

Skill Shot Weldment  (does not come with stickers)  Gold zinc coated (redesigned)

Totanskill2.JPG (42582 bytes)