The protector is very similar to Kiss. Both games use the same size hole and scoop. From the picture above you can see a screw coming from the top of the playfield down into edge
of the mounting hole. Only one screw is needed to mount the protector due to the tight fit but the screw will still fit alongside the other screw.
The main difference in this protector from Kiss is that this protector is higher. The playfield bevel is not as deep on metallica. If you wanted to use the metallica protector in Kiss or vice versa
you could do that. The Kiss will sit lower in the hole and the Metallica will sit higher.
I built mine with much better welds continuous welds instead of spot welds
This Web Page Created with PageBreeze Free HTML Editor